Dual 1019 Turntable with Custom Plinth & Shure Cartridge
This item is reserved for a customer. Please do not purchase.
Sale includes the DUAL 1019 turntable, Shure cartridge with new Shure brand replacement stylus. Just opened to test on this unit.
Unit has been properly cleaned and lubed in all areas stated in the service manual.
**Please note setup instructions for this unit (run the start cycle with the tone arm locked to sync the gears after moving or shipping the item) please refer to service manual and user manual links below. The manuals will also help with setting elevation and tracking/Anti-Skate, etc. I already adjusted the elevation arm to the correct raise heighth so hopefully you will not have to make any adjustments underneath, but just incase I do recomend setting it up for the first time not mounted in the plinth. It sits nice and flat out of the plinth resting on its motor. Once confident you have it all set up, then put in plinth and fine tune. You may have to repaeat the first step with the tone arm locked mentioned above.
Links to Manuals:
Dual 1019 Service Manual | |
Dual 1019 User Manual |
Additional:
Thank you for your patience and your business. Rest assured this unit will be safely packaged.
DOnt forget to consider ordering the digital scale to help set the cartridge weight for this table. The counterweight is not as easy to gauge weight as most tables so a scale will help greatly in getting the proper weight set. I typically set between 2.0-2.5 grams.